![]() ![]() You don't need another person.just make sure your reservoir is full each time before you work on the next caliper.I did mine 2x for each caliper before I moved onto the next one(because I have a BBK with 2 bleeder screws in each caliper.) I did it in this order.furthest to the master cylinder. Check your reservoir add fluid to make sure it's full. Then it will make you follow a series of holding the brake pedal and releasing it.until it's done and it will then tell you to close the bleeder screw.go outside and close the screw.go back in the car and click ok in INPA. INPA will then tell you to open the bleeder screw.go to the caliper and open the bleeder screw.go back in the car.then click OK in INPA. Under that menu I chose the 1st caliper I wanted to work on which is."reworked the DSC Rear Right" (19:00 mark in that video) Have your catch bottle and bleeder screw wrench ready and connected to the caliper your bleeding.Ĥ. I don't have a detailed diy but I pretty much followed that video step by step.ġ. I used that video when I bled my brake system and I found it very very helpful. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |